Front Brakes
STC1914 Slider Pin Bolt – D2/F1/P38
Discovery 2 +5″ Extended Brake Hoses – Set of 4
Discovery 2 +2″ Extended Brake Hoses – Set of 4
Discovery 2 Front Brake Upgrade Kit – LOF POWERspec Kit
The LOF POWERspec Brake kit is designed for heavily loaded D2's. POWERspec kits come complete with fitting kit including fasteners, pins, anti rattle shims and the correct grease where necessary. Everything needed to upgrade your D2 brakes. Vented Brake Discs: Dimpled and grooved, with black phosphate finish for corrosion resistance and removal of Debris & Heat. Brake Pads: Performance Organic/ Ceramic friction material. POWERspec Pads: The brake pads have been designed for tuned and modified hard working trucks. A high braking effect, Upgraded coefficient of friction (0.57) Designed for fast road use, stopping highly loaded vehicles including towing vehicles. POWERspec pads have edge chamfers which reduce noise but do not reduce life, uncoated, minimal bedding in required. Pads include noise reduction coating shim on the rear of the pad.
M10 x 1.0 Stainless Steel Bleed Screw and Dust Cover
Front Brakes, Front Brakes, Front Brakes, Rear Brakes, Rear Brakes, Rear Brakes, Brakes, Braking System, Brakes
STC1911 Slider Pin Dust Cover Set
EBC Ultimax Front Brake Pads – D2
Discovery 2 Td5 Stainless Steel Braided Brake Hose Kit
Braided brake lines for Land Rover Discovery 2 Td5 1998-2005. Please see part numbers below showing what these brake flexi hoses replace. This is a 6 line kit. Standard hoses in stock will be black with black protective coils and are +2" to suit vehicles from standard height up to 2 inches of suspension lift. Replaces:
- 2 x hoses body to calipers (Original Part Numbers: SHB101180 & SHB101190)
- 2 x hoses body to chassis (Original Part Number: SHB101350)
- 2 x hoses chassis to rear calipers (Original Part Numbers: SHB101170 & SHB101200)
- Plain stainless steel banjo bolts and securing nuts where required
- Crush washers where required
Discovery 2 Front Brake Upgrade Kit – LOF ROADspec Kit
The LOF ROADspec Brake kit is designed for road going Land Rovers. The discs and pads are of OEM spec, made to the same quality and tolerances as genuine Land Rover brake components. These ROADspec kits come complete with fitting kit including fasteners, pins, anti rattle shims and the correct grease where necessary Discs: Plain silver scotch finish. Pads: OE Quality Organic friction material.
