Uprated Td5 Turbo Oil Feed and Drain Kit – D2/Defender
The ultimate turbo oil feed and drain kit for all Td5 engines. Made in the UK this complete turbo feed and drain pipe kit for Td5 Defender and Discovery provides for easier servicing/turbo removal, greater reliability and eliminates the flange warping issues common to the OEM pipes. This kit fits all Td5 Discovery and Defender with standard turbo. These are not the same kits supplied with Alive VGT turbos and will not fit those turbos.
Stainless Braided One-Piece Clutch Line for Defender Td5 RHD
Fits all right hand drive Td5 Defenders 1998-2007. This is a once-piece kit that does away with steel clutch pipe, the clutch flexi and the little hard pipe connecting to the slave (all things that rot and perish over time) so you just have one stainless braided hose with stainless fittings running from the master cylinder to the slave. Normally stocked kits will be BLACK, however other colours are available on request if required - please contact us.
Discovery 2 Td5 Stainless Steel Braided Brake Hose Kit
Braided brake lines for Land Rover Discovery 2 Td5 1998-2005. Please see part numbers below showing what these brake flexi hoses replace. This is a 6 line kit. Standard hoses in stock will be black with black protective coils and are +2" to suit vehicles from standard height up to 2 inches of suspension lift. Replaces:
- 2 x hoses body to calipers (Original Part Numbers: SHB101180 & SHB101190)
- 2 x hoses body to chassis (Original Part Number: SHB101350)
- 2 x hoses chassis to rear calipers (Original Part Numbers: SHB101170 & SHB101200)
- Plain stainless steel banjo bolts and securing nuts where required
- Crush washers where required
Defender Td5 Stainless Steel Braided Brake Hoses (non-ABS)
Braided brake lines for Land Rover Defender Td5 1998-2007 non-ABS with male metric hose fittings on front (90, 110 and 130). Please see part numbers below showing what these brake flexi hoses replace. Standard hoses in stock will be black with black protective coils and are +2" to suit vehicles from standard height up to 2 inches of suspension lift. Replaces:
- 2 x hoses chassis to hub bracket (Original Part Number: NRC7874)
- 1 x hoses chassis to rear axle T Piece (Original Part Number: NRC9455)
- Plain stainless steel banjo bolts and securing nuts where required
- Crush washers where required
Braided Brake Lines For Land Rover Defender Tdi/Td5 1990-2007 Front Caliper Hardline Kit
Two front caliper brake hoses to replace the hard lines between the front caliper and front flexible hoses, replacing ANR2946 and ANR2947. These can be fiddly and difficult to make from traditional copper brake pipe. This kit simple bolts on and with the added bonus it is not susceptible to cracking and will last a lifetime!
