Front Brakes
SYP500090 Caliper Bolt – D1 / D2 / Defender All / P38 FTC3375
POWERboost Brake Servo Kit for non-ABS Defender
If your Defender is not fitted with ABS then this kit doubles up on your braking performance by enabling fitment of the larger brake servo fitted to Defenders with ABS brakes. The ABS brake servo is around twice the size of the standard brake booster and significantly improves braking. The adaptor ring is anodised and supplied with a better master to servo seal than standard and new fixings. Available on its own or with a new brake servo, please select which brake servo you require - either Lucas TRW or LOF Brakes - both are double diaphragm servos suitable to use with this kit.
M10 x 1.0 Stainless Steel Bleed Screw and Dust Cover
Front Brakes, Front Brakes, Front Brakes, Rear Brakes, Rear Brakes, Rear Brakes, Brakes, Braking System, Brakes
LR017952G Front Vented Brake Disc – Delphi – Defender/D1/RRC – Pair
Defender Td5 Stainless Steel Braided Brake Hoses (non-ABS)
Braided brake lines for Land Rover Defender Td5 1998-2007 non-ABS with male metric hose fittings on front (90, 110 and 130). Please see part numbers below showing what these brake flexi hoses replace. Standard hoses in stock will be black with black protective coils and are +2" to suit vehicles from standard height up to 2 inches of suspension lift. Replaces:
- 2 x hoses chassis to hub bracket (Original Part Number: NRC7874)
- 1 x hoses chassis to rear axle T Piece (Original Part Number: NRC9455)
- Plain stainless steel banjo bolts and securing nuts where required
- Crush washers where required
Performance Front Brake Kit – Defender 90/110/130 (1994-16)
LOF POWERspec front brake kit for Defender 90, 110 or 130 with vented front brake discs. Kit contains dimpled and grooved vented brake discs, high performance brake pads (R90 approved for use throughout the world) and all required fittings (see below). Timken wheel bearings are also available to purchase with this kit at a slightly reduced price, please select if required. This kit fits all Defender from approximately 1994 onwards. The fitting items supplied with this kit are for both the early adjustable type wheel bearings and the later type that utilise a spacer, therefore you will not need to use all of the parts supplied depending which you have.