Power Train

ICV100000G LT230 Transfer Box Input Seal – Gearbox To Transfer Box

Transfer Box, Transfer Box, Transfer Box, Transfer Box

£5.95 ex VAT (£7.14 incl VAT)

ICV100000G LT230 Transfer Box Input Seal

ERR6581 OEM TD5 Clutch Flywheel Bolts x 8

Clutch, TD5, Clutch, TD5

£14.95 ex VAT (£17.94 incl VAT)

ERR6581 OEM TD5 Clutch Flywheel Bolts x 8

549473 Half Shaft Circlip

Front, Front Axle, Front Axle, Front Axle

£0.95 ex VAT (£1.14 incl VAT)

549473 Half Shaft Circlip Bearmach Ref: BR 2143

FRC6782 Drive Flange Shim 0.45mm

Front Axle, Front Axle, Front Axle, Front

£5.95 ex VAT (£7.14 incl VAT)

FRC6782 Drive Flange Shim 0.45mm

Manual Transmission, Manual Transmission, Manual Transmission, Manual Transmission, Manual Transmission

TDI/TD5/Series/TDCI/TD4 Clutch Alignment Tool TW017

£6.95 ex VAT (£8.34 incl VAT)

Clutch alignment tool to suit TDI, TDCI Puma, TD5, 2.25 and all 4cyl engines TW017

PRC2911G Switch D1/D2/DEF 83-06/RRC (Lucas)

Transfer Box, Transfer Box, Transfer Box

£7.95 ex VAT (£9.54 incl VAT)

PRC2911G Switch D1/D2/DEF 83-06/RRC Diff Lock / Reverse - see fitment tab Lucas Brand

OEM Defender Wheel Bearing Spacer (15.1mm – Green) Td5 & TDCI (TOF100040)

Front Axle, Front, Rear Axle, Rear

£9.95 ex VAT (£11.94 incl VAT)

TOF100040 Bearing Spacer (15.1mm - Green) Defender Td5 & TDCI (from VIN LA930456) Fits front or rear axle. This spacer sits between the two taper bearings on Defender Td5 and TDCI hubs (not the adjustable type). When changing bearings identify whether they are the older adjustable type or not - do not fit these Defender bearing spacers with the adjustable type!

Land Rover Td5 Heavy Duty Clutch and Solid Mass Flywheel Kit

TD5, Clutch, Clutch, TD5, TD5, Heavy Duty Clutches

ex VAT (£479.94 incl VAT)

Heavy duty clutch and solid flywheel kit for TD5 by Clutchfix. Rated for 500Nm of torque! Includes heavy duty billet release bearing, push rod, push rod clip, nylon fork insert and Oilite spigot bush. Fits: Defender Td5 90 110 130 Discovery 2 Td5 All other vehicles fitted with Td5 engine and R380 gearbox

STC500100 Land Rover Clutch Master Cylinder – Defender / Series 3 (Girling)

Clutch

ex VAT (£90.00 incl VAT)

STC500100 Land Rover (Girling) Clutch Master Cylinder - Defender/S3/SIII. This only the master cylinder, if you have the adaptor for a clutch switch then this will need to be re-used. These are exactly the same as genuine Land Rover equivalents, just without the JLR box. A new high quality fluid cap is also included. Reference Part Numbers: 550732G STC100410G STC100411G STC500100G

FRC8393 Defender 90 300 Tdi / TD5 / V8 – Rear Propshaft

Rear

£79.95 ex VAT (£95.94 incl VAT)

FRC8393 Defender 90 300 Tdi / TD5 / V8 - Rear Propshaft

LOF Defender Power Master & Pedal Spring Kit

Manual Transmission, TD5, LOF Engineering

£59.95 ex VAT (£71.94 incl VAT)

1x LOF POWERspring for Defender 1x LOF POWERmaster for Defender

TD5 POWERslave from LOF Clutches

Clutch, TD5, LOF Engineering

£29.95 ex VAT (£35.94 incl VAT)

TD5 POWERslave from LOF Clutches. Fits both Defender and Discovery Td5 vehicles. We recommend not fitting at the same time as a new clutch, instead bed the clutch in first then replace the slave cylinder with this POWERslave. Equivalent to Land Rover part FTC5202

Td5 VNT Heavy Duty Clutch 650Nm Clutchfix HD Clutch Kit

Heavy Duty TD5 Clutch – HD1 Organic VNT 650Nm

TD5, Clutch, Clutch, TD5, TD5, Heavy Duty Clutches

£250.00 ex VAT (£300.00 incl VAT)

Heavy duty clutch for TD5 by Clutchfix. Rated for 650Nm of torque, ideally suited for VNT applications and those running above average power! Organic friction material and heavy duty release bearing.

Clutch Fork Kit – R380 – Cast Metal – 576137K

TD5, Clutch, Clutch, TD5

£48.95 ex VAT (£58.74 incl VAT)

576137K - R380 Clutch Fork Kit

FTC5072G Slave Cylinder – 300TDI & V8 – Def/D1/RRC

Clutch, Clutch, Clutch

£31.95 ex VAT (£38.34 incl VAT)

FTC5072 Slave Cylinder - 300TDI & V8 - Def/D1/RRC. See fitment table for specific applications. Brand: AP Driveline or TRW

STC500100G Lucas TRW Clutch Master Cylinder – Defender/S3

Clutch

£29.95 ex VAT (£35.94 incl VAT)

STC500100G Lucas TRW Clutch Master Cylinder - Defender/S3. This only the master cylinder, if you have the adaptor for a clutch switch then this will need to be re-used. Reference Part Numbers: 550732G STC100410G STC100411G STC500100G

Manual Transmission, Manual Transmission, Manual Transmission, Manual Transmission

FTC4021 Distance Collar Oil Seal – R380

£3.95 ex VAT (£4.74 incl VAT)

FTC4021 Distance Collar Oil Seal - R380 - Allmakes or Bearmach Fits all Defender, Discovery 1, Discovery 2 and Range Rover Classic with R380 gearbox

FTC3905G Drive Shaft Assembly – Propshaft – Defender 110

Rear

£135.00 ex VAT (£162.00 incl VAT)

FTC3905 - New Hardy Spicer rear propshaft to fit Defender 110 with Salisbury axle - 300Tdi, V8 (1994-02) and Td5 (1998-02)

Stainless Braided One-Piece Clutch Line for Defender Td5 RHD

Clutch

£56.95 ex VAT (£68.34 incl VAT)

Fits all right hand drive Td5 Defenders 1998-2007. This is a once-piece kit that does away with steel clutch pipe, the clutch flexi and the little hard pipe connecting to the slave (all things that rot and perish over time) so you just have one stainless braided hose with stainless fittings running from the master cylinder to the slave. Normally stocked kits will be BLACK, however other colours are available on request if required - please contact us.

Defender Solid Rear Half Shaft Upgrade Kit

Rear Axle, Rear

ex VAT (£155.94 incl VAT)

This Defender rear solid drive shaft upgrade kit includes both left and right halfshafts, gaskets and new bolts. Fits all Defender rear axles with a Rover diff (24 spline) This does not fit Defenders with Salisbury rear axles. Reference part numbers and supersessions : TOB500030, LR072977, TOB500020, LR072976, BX110095, 571752.