Defender / Discovery TD5 Full Exhaust Fitting Kit
TD5 Silicone Oil Cooler Blanking Plug
Copper Sealing Washers – Td5 Turbo Oil Feed & Alternator Vacuum – 10 pack
Ultimate Td5 Exhaust Manifold Stud Kit
The ultimate heavy duty Td5 exhaust manifold stud kit aimed at tuned and hard working Td5 engines where manifold warping is highly likely. This is a complete kit with all gaskets, nuts, bolts and seals required. A choice of aftermarket or OEM exhaust manifold gaskets are available here LKG10070 Twinwoods 4×4 Part Number : TW001A 10% discount for 2 or more kits (available on website for retail customers only)
Td5 Injector Puller / Removal Tool
Refaced & Dewebbed TD5 Exhaust Manifold
LIMITED STOCK Skimmed / refaced exhaust manifold for Td5 Defender and Discovery with a new exhaust manifold gasket. Warping is a common problem but easily fixed! These manifolds are de-webbed, heat treated and all three mating faces machined flat. As standard a new OEM exhaust manifold gasket is included and we offer a choice of stud kits (TW001 or TW001A), please select below. LKC102020
Replacement O-Ring for LDI100030 Front Camshaft Oil Seal
TW041 Discovery 2 & Discovery 300Tdi Rear Propshaft 4 Bolt Conversion Kit
Propshaft Nut and Bolt Kit – Defender, D1 & RRC
Suitable for all Defender, Discovery 1 and Range Rover Classic Vehicles. Kit contains nuts and bolts for one propshaft.
- 4 x LR045409 Bolts
- 8 x NZ606041L Nuts
Td5 Oil/Fuel Filter Spanner – Mahle
TD5 EGR Blanking Plate – 5mm 304 Stainless Steel
TD5 EGR blanking plate with cap head bolts and gasket. Can be used on the exhaust manifold or EGR cooler. 5mm 304 Stainless Steel Kit contains: 2 x Cap head bolts DIN 912
1 x Blanking plate AISI 304 / EN 1.4301 Quantity discounts available
IMPORTANT: Please check the laws and legislation in your country before purchasing any EGR bypass kit as it may be illegal to use in your country, particularly in countries or states where alterations to vehicle emissions systems are not allowed.
Toolbox Sticker – Twinwoods 4×4
Td5 Viscous Fan Spanner Set
Td5 viscous fan spanner set designed to help with removing and installing the viscous fan on Td5 engines without damaging the retaining nut. Made from high quality 6mm mild steel and Nitrotec treated for corrosion resistance these spanners will give many years of service. Equivalent to LRT-12-093 / 303-904 and LRT-12-094 / 303-905
Defender Puma Injector Seal and Camshaft Cover Seal Kit – OEM Quality (2.4 TDCI)
Twinwoods 4×4 Winter Hat
Td5 Starter Motor Solenoid Rebuild Kit
Td5 Starter Motor Solenoid Rebuild Kit - fits all Td5 starter motors. These are wearing parts and this kit is a cost-effective alternative to replacing the whole starter motor. If you just hear a clicking when trying to start your Td5 then this is the most likely culprit. If you hear nothing at all then check the small wire on the starter motor as these can come loose over time, sometimes just a squeeze with some pliers is all the connection needs.
Heavy Duty TD5 Exhaust Manifold Stud Kit
D2 Brake Retaining Screw Set (Countersunk Allen Socket Head)
Set of 5 disc/drum retaining screws. Made in A2 stainless steel to ISO 10642 standards. Fits Discovery 2 hubs and transmission brake drum. A perfect replacement to the original disc retaining bolts which are commonly rusted in and often cannot be removed with a normal Philips screwdriver. These require an Allen key offering much better grip than a screwdriver. Sold in sets of five for the four brake discs and transmission brake. We recommend adding a small amount of grease to the threads and not over tightening. Replaces SF108201L. Also fits Defender, Discovery 1 and Range Rover Classic transmission drums. Also available in bulk - please contact us.
Td5 Oil Filter Spanner for Genuine Filters
