Workshop & Tools – Page 4

Land Rover Under Bonnet Inspection Lamp LED

50 SMD LED Under Bonnet Inspection Lamp – 2000 Lumens – USB-C

Draper Tools stockist Bedfordshire Northamptonshire Cambridgeshire

ex VAT (£71.94 incl VAT)

Rechargeable under-bonnet inspection lamp ideal for the Land Rover enthusiast! We have one in our workshop and use it all the time! It can also be inverted and used on the floor under a vehicle.

Add to wishlist

Quick view

Ball Joint Splitter 19mmm

Service Tools

£14.95 ex VAT (£17.94 incl VAT)

Chemically blackened forged steel body with thrust bolt. Suitable for most small cars and light vans. Jaw Width: 19mm. Ideal for Land Rover track rod ends!

Rechargeable Pocket Floodlight with Magnet 360° 7W COB LED – Green

Lighting

ex VAT (£47.94 incl VAT)

Incredibly tough aluminium housing with sturdy handle which can rotate through 360°. Virtually indestructible and one of the most durable floodlights available. Also fitted with a strong magnet, making it simple and easy to direct up to 700 lumens of light. Three light output settings: 100/350/700 lumens. Features three LED battery level indicator. Fitted with a high quality 3.7V 2.6Ah lithium-ion battery. Charges via a USB Type-C lead (supplied)

Coil Spring Compressor 3pc with Safety Hooks

Spring Compressors

ex VAT (£71.94 incl VAT)

Coil Spring Compressor 3pc with Safety Hooks. Carbon steel, hardened lead screws and cast jaws with safety hooks to prevent accidental release of spring under compression. Maximum load per set of three clamps 1200kg.

Nett Weight:	2.73kg
Drive:	1/2"Sq
Maximum Jaw Opening:	235mm

Copper Faced Mallet 1.95kg Hickory Shaft

Hammers

ex VAT (£59.94 incl VAT)

Copper Faced Mallet 1.95kg (4.3lb) Hickory Shaft. Sometimes even delicate items need a good whack, and this mallet is ideal for the job as the double ended sacrificial pure electrolytic copper faces prevent damage to the workpiece. Made in the UK. Replacement copper faces available.

10pc Step Drill Screw and Bolt Extractor Set

Stud and Bolt Extractors

ex VAT (£59.94 incl VAT)

10pc Step Drill Screw and Bolt Extractor Set

Add to wishlist

Quick view

Welding Pliers

Fabrication and Metalwork

£31.95 ex VAT (£38.34 incl VAT)

Drop-forged steel construction and fitted with spring loaded, fully insulated handles. Seven uses for the welder:

nozzle/tip cleaner
nozzle/tip remover
wire cutter
flux chipper
long nose pliers

As used in our own workshop.

Draper Expert Washer Jet Tool

Service Tools

ex VAT (£9.54 incl VAT)

Washer Jet Tool. Knurled body with pocket clip, needle point one end and scriber point on the other. For cleaning and repositioning of vehicle washer jets. Supplied with end caps to prevent personal injury when not in use.

MIG/TIG Torch Magnetic Stand

Fabrication and Metalwork

ex VAT (£11.94 incl VAT)

MIG/TIG Torch Magnetic Stand. For storing MIG and TIG torches. For use with Draper and other manufacturers welding torches.

78639 Draper 1/4″ Drive Torque Wrench (5-25Nm)

Torque Wrenches

£27.95 ex VAT (£33.54 incl VAT)

Easy to use torque wrench. The click-type operation and micrometer adjustment allow the user to apply the correct torque when required. The torque value range is 5 - 25Nm. Clockwise right-hand thread torque application only. Supplied in a blow mould case.

64535 Draper 1/2″ Drive Torque Wrench (30-210Nm)

Torque Wrenches

ex VAT (£47.94 incl VAT)

Reversible ratchet head. The in-lb and Nm scale is engraved on the barrel of the wrench. The micrometer type sleeve allows accurate preset torque values to be set. When torque is reached the wrench produces an Audible click and a release of tension. Marked range: 30-210Nm/22.1-154.9 lb-ft. Clockwise right-hand thread torque application only. Supplied in blow mould storage case.

Draper Expert 3 Tonne Trolley Jack : 78-510mm

Jacking & Lifting

ex VAT (£239.94 incl VAT)

As used by us! We have these in our own workshop and cannot fault them for work on Land Rovers. These trolley jacks feature an extra-fast single lifting pump to ensure they reach full height in just 2.5 strokes. They have a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle when in operation. Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors. There is a safety valve to prevent the jack from overloading. Draper Expert 23817 Why not pair them with a set of axle stands! Have a look HERE

BlueSpot 10 Piece 1/2″ Impact Socket Set 10mm-24mm

1/2 Socket Sets

ex VAT (£23.94 incl VAT)

10 piece 1/2" drive metric deep impact socket set (10-24mm). Manufactured from heat-treated, tempered chrome vanadium for strength and durability. Designed for use with impact guns and high torque air tools but also suitable for hand ratchets. Deep impact socket for increased range and precision. Contains socket sizes: 10, 11, 13, 14, 17, 18, 19, 21, 22, 24mm. Complete with a handy carrying case for quick and easy storage. This is a great value kit.

2 Tonne Bottle Jack

Jacking & Lifting

ex VAT (£26.34 incl VAT)

High quality, fitted with overload protection. Wide base for improved stability and cross sectioned saddle delivers better grip. Fitted with an adjustable height ram saddle. Supplied with two-piece handle. Tested and certified to the current EN1494 standard.

Range	148-278mm
Screw Extension	50mm

Air Compressor 24L Direct Drive 1.5hp

Air Compressors

ex VAT (£239.94 incl VAT)

A great little compressor suitable for most home workshops and garages. Runs from a standard 13A plug.

Metric Feeler Gauge Set

Measuring

ex VAT (£10.74 incl VAT)

Metric graduated 15 blade feeler gauge set. Sizes: 0.06 to 0.70mm. Blade dimensions: 75 x 13mm. 0.06, 0.07, 0.08, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.70mm

Oil Container with Pouring Spout and Lid

Measuring

ex VAT (£17.94 incl VAT)

Polyethylene jug resistant to oil and most acids. Removable flexible spout. Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages. Scale for indication purposes only.

Long Reach Hook and Pick Set 6 piece

Service Tools

ex VAT (£19.14 incl VAT)

Designed to ease the removal of 'O' rings, split pins, seals and bushes in various automotive and engineering applications. The stainless steel 240mm blades are hardened and tempered.

Add to wishlist

Add to basket

Quick view