Rear Axle
CDU1534L Driveshaft and Hub Stake Nut – D2/F1/P38
CDU1534L Driveshaft and Hub Stake Nut - Discovery 2 / Freelander 1 / Range Rover P38 32mm socket required. Once the hub nut is torqued up use a punch to knock a section of the nut into the slot in the drive shaft to lock the nut in position. Discovery 2 - 490Nm
Freelander 1 - 400Nm
Range Rover P38 - 260Nm Some aftermarket hub nuts are a different size, anything from 32-36mm has been known, so you may require a different size to remove the old hub nut.
STC4858 Rover Differential Flange Kit – 4 bolt
STC4858 Rover Diff 24 spline Pinion Flange - 4 bolt type (see fitment tab). Sold without seal - please choose the correct seal for your vehicle. This the later type diff flange which does not need a spacer. If you have the square 4 bolt flange that uses a spacer then the spacer will need to be removed before fitting this diff flange.
FRC8387G Rear Propshaft – Discovery 200 TDI Hardy Spicer
Rear prop shaft which fits the following models:-
- Range Rovers Classics all models from 1986 to 1994 (wont fit LWB models or 1995 models with a rubber coupling).
- Discovery 1 89-94
- Can also be used in conjunction with STC4858R on Discovery 1 300TDI and discovery 2 to eliminate the rubber Coupling (see kit TW041)
ERR4686B Discovery 2 Differential Brass Filler with O-ring
TW041 Discovery 2 & Discovery 300Tdi Rear Propshaft 4 Bolt Conversion Kit
FTC4919LR O Ring – Rear Drive Shaft Seal (Hub Flange) – Discovery 2 – Genuine Land Rover
LR017552 Differential Pinion Mud Shield
Front Axle, Front Axle, Rear Axle, Rear Axle, Rear Axle, Axles and Suspension, Front Axle, Rear Axle
TAY100050 Wheel Bearing and Hub Assembly – D2 – Rear
