FREE UK DELIVERY ON ORDERS OVER £250.  WORLDWIDE EXPRESS DELIVERY AVAILABLE

FREE UK DELIVERY ON ORDERS OVER £250.  WORLDWIDE EXPRESS DELIVERY AVAILABLE

Special Offers

Here you will find products which are either reduced to clear or are on limited time special offers.  No voucher codes are needed.  These products discounts are excluded from any other offers or voucher codes.

 

Standard Assorted Automotive Fuses – 120 piece set

Draper Tools stockist Bedfordshire Northamptonshire Cambridgeshire
Original price was: £15.98.Current price is: £9.95. ex VAT (£11.94 incl VAT)
Assortment of standard automotive fuses in plastic storage case.  Approximately 20 of each fuse rating: 5A, 10A, 15A, 20A, 25A and 30A.

LR032352 Rover Differential – 24 spline 2 pin

Original price was: £550.00.Current price is: £495.00. ex VAT (£594.00 incl VAT)
LR032352 Complete Rover Differential.  This fits many Land Rover vehicles however flanges may need to be swapped or purchased separately.  Please contact us if you are unsure. This is an outright purchase – no exchange.  Please note this is a special order item 2 pin 24 spline Suitable for:
  • Defender 90 Front and Rear
  • Defender 110, 130 Front
  • Discovery 1 & 2 Front and Rear
This will not fit 110/130 rear.

Coil Spring Compressor 3pc with Safety Hooks

Sealey Tools stockist Bedfordshire Northamptonshire
Original price was: £84.95.Current price is: £59.95. ex VAT (£71.94 incl VAT)
Coil Spring Compressor 3pc with Safety Hooks.  Carbon steel, hardened lead screws and cast jaws with safety hooks to prevent accidental release of spring under compression.  Maximum load per set of three clamps 1200kg.
Nett Weight:2.73kg
Drive:1/2″Sq
Maximum Jaw Opening:235mm

Copper Faced Mallet 1.95kg Hickory Shaft

Original price was: £72.95.Current price is: £49.95. ex VAT (£59.94 incl VAT)
Copper Faced Mallet 1.95kg (4.3lb) Hickory Shaft.  Sometimes even delicate items need a good whack, and this mallet is ideal for the job as the double ended sacrificial pure electrolytic copper faces prevent damage to the workpiece. Made in the UK.  Replacement copper faces available.

10pc Step Drill Screw and Bolt Extractor Set

Original price was: £72.95.Current price is: £49.95. ex VAT (£59.94 incl VAT)
10pc Step Drill Screw and Bolt Extractor Set

Draper Expert Washer Jet Tool

Draper Tools stockist Bedfordshire Northamptonshire Cambridgeshire
Original price was: £10.05.Current price is: £7.95. ex VAT (£9.54 incl VAT)
Washer Jet Tool.  Knurled body with pocket clip, needle point one end and scriber point on the other.  For cleaning and repositioning of vehicle washer jets.  Supplied with end caps to prevent personal injury when not in use.

FTC3912 Clutch Push Rod 105mm – R380 Tdi

Original price was: £19.95.Current price is: £15.95. ex VAT (£19.14 incl VAT)
FTC3912 Clutch Push Rod 105mm – R380 Tdi

MIG/TIG Torch Magnetic Stand

Original price was: £12.50.Current price is: £9.95. ex VAT (£11.94 incl VAT)
MIG/TIG Torch Magnetic Stand.  For storing MIG and TIG torches. For use with Draper and other manufacturers welding torches.

PGG101290 Viscous Fan – Range Rover P38

Original price was: £74.95.Current price is: £64.95. ex VAT (£77.94 incl VAT)
PGG101290 Viscous Fan – Range Rover P38

TF152NUTBLACK Black Wheel Nut D3/D4 (5 pack)

Original price was: £4.95.Current price is: £2.95. ex VAT (£3.54 incl VAT)
Black wheel nut (5 pack) for Terrafirma 18×8 steel wheels D3/D4

64535 Draper 1/2″ Drive Torque Wrench (30-210Nm)

Draper Tools stockist Bedfordshire Northamptonshire Cambridgeshire
Original price was: £54.80.Current price is: £39.95. ex VAT (£47.94 incl VAT)
Reversible ratchet head. The in-lb and Nm scale is engraved on the barrel of the wrench. The micrometer type sleeve allows accurate preset torque values to be set. When torque is reached the wrench produces an Audible click and a release of tension. Marked range: 30-210Nm/22.1-154.9 lb-ft. Clockwise right-hand thread torque application only. Supplied in blow mould storage case.

Draper Expert 3 Tonne Trolley Jack : 78-510mm

Draper Tools stockist Bedfordshire Northamptonshire Cambridgeshire
Original price was: £219.95.Current price is: £199.95. ex VAT (£239.94 incl VAT)
As used by us!  We have these in our own workshop and cannot fault them for work on Land Rovers. These trolley jacks feature an extra-fast single lifting pump to ensure they reach full height in just 2.5 strokes. They have a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle when in operation. Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors. There is a safety valve to prevent the jack from overloading. Draper Expert 23817 Why not pair them with a set of axle stands!  Have a look HERE

Shopping cart
Sign in

No account yet?

Sidebar
We collect cookies to analyse our website traffic and performance; we never collect any personal data.  By using this website, you agree to our use of cookies.
Home
Shop
My account
1 item Cart